The International Conference on Applied Mechanics and Mechanical Engineering - Articles List

Volume & Issue: Volume 1, 2nd Conference on Applied Mechanical Engineering., May 1986

TOWARD THE DESIGN OF AN INTELLIGENT AEROSPACE CONTROL SYSTEM

Pages 1-19

10.21608/amme.1986.51267

Mohammad Nabih Wagdi

A METHODOLOGY FOR INTERRELATING MANUFACTURE, CHARACTERIZATION AND FUNCTION FOR ENGINEERING SURFACES

Pages 21-25

10.21608/amme.1986.51750

Sabet R. Ghabrial

CASE STUDY OF NOISE AND ITS REDUCTION

Pages 27-33

10.21608/amme.1986.51754

AWNY Y. ATTIA

New Development in the Design and Production of Solar Collectors

Pages 35-42

10.21608/amme.1986.51765

A. Salem El-Sabbagh; M. H. Abdellatif; Z. Ghonim

New Development in the Design and Production of Solar Collectors.

Pages 43-51

10.21608/amme.1986.51767

AN INTEGRATED APPROACH TO DESIGN, MANUFACTURE AND MATERIALS SELECTION IN ENGINEERING

Pages 53-61

10.21608/amme.1986.51770

MAHMOUD M. FARAG

MODELLING OF PIPING DESIGNS ON CADD COMPUTER SYSTEMS

Pages 63-74

10.21608/amme.1986.51773

Roshdi Amer

WALKING VEHICLES

Pages 75-85

10.21608/amme.1986.51775

Ealah E. A. Bayoumi

COMPUTER AIDED ANALYSIS OF COMPLEX VIBRATION SIGNATURE OF TURBOJET ENGINES

Pages 1-12

10.21608/amme.1986.51782

A. MAHER; S. KOSSA; M. KADDAH; M. EL-HUSSEINY

LATERAL VIBRATION OF CANTILEVERS ON VISCOELASTIC FOUNDATIONS

Pages 13-22

10.21608/amme.1986.51793

S. A. KASSEM

EXPERIMENTAL INVESTIGATION OF NONLINEAR AERODYNAMIC DAMPING OF PARTIAL AIRPLANE ASSEMBLY

Pages 23-30

10.21608/amme.1986.51794

O. E. ABDELHAMID

ABOUT THE LUMPED PARAMETER APPROACH TO HYDRAULIC LINE MODELLING

Pages 31-46

10.21608/amme.1986.51797

Calal RABIE

A GENERAL PROCEDURE FOR INVESTIGATING THE INSTANTANEOUS KINEMATICS OF MULTI-LOOP MECHANISMS

Pages 47-55

10.21608/amme.1986.51800

MAHER GABER MOHAMED

ANALYSIS OF TRACKED VEHICLES TURNING ON LEVEL TERRAINS

Pages 57-68

10.21608/amme.1986.51802

ABDEL MEGID ZIDAN

ANALYSIS OF BARREL VIBRATION DURING FIRE

Pages 69-80

10.21608/amme.1986.51812

M. S. ABO ELKHAIR; M. ELNAGGAR; A. S. BASSIOUNI

AUTOMATIC NORMAL MODE TESTING

Pages 81-87

10.21608/amme.1986.51815

K. Zaveri

ANALYSIS OF ANISOTROPIC ELASTIC FOUNDATION UNDER CONCENTRATED FORCES

Pages 1-12

10.21608/amme.1986.51820

E. E. EL-SOALY

MDDELING OF GEAR TOOTH BY THICK PLATE

Pages 13-23

10.21608/amme.1986.51823

Kamal Hassan; Henry Busby; Donald Houser

CREEP AND FRACTURE OF NICKEL-ALUMINIUM ALLOY

Pages 25-34

10.21608/amme.1986.51832

MOHAMED A. ABDOU

INHOMOGENEOUS DEFORMATION ZONE IN TENSILE SPECIMEN

Pages 35-42

10.21608/amme.1986.51834

SAMIR K. EL-NEMER

GEAR NOISE MEASURING TECHNIQUE

Pages 1-12

10.21608/amme.1986.51835

SH. ABDELAZI; N. GADALLAH

OPTIMAL CONTROL OF A TURBOJET ENGINE A DYNAMIC PROGRAMMING APPROACH.

Pages 13-26

10.21608/amme.1986.51837

MOHTASSEM BILLAH KADDAH

DESIGN PARAMETERS CF THE MULTI-BOLTED JOINT.

Pages 1-11

10.21608/amme.1986.51838

GABER M.M. SHEHA

THE MOTION EFFECT ON THE (EHD) BEHAVIOUR OF CAM MECHANISMS

Pages 13-20

10.21608/amme.1986.51840

S. M. GHONEAM

A REVIEW OF SOLID PARTICLE EROSION; SELECTED PUBLISHED INFORMATIONS

Pages 21-33

10.21608/amme.1986.51843

F. A. BASSILI; W. J.D. JONES

FATIGUE OF RAILWAY STEEL CLIPS

Pages 35-46

10.21608/amme.1986.51845

M. F.E. IBRAHIM; M. S. GABRA

BEHAVIOUR OF ALUMINIUM- MAGNESIUM ALLOY UNDER ROTATING BENDING FATIGUE TESTS

Pages 47-55

10.21608/amme.1986.51850

Mohamed Kenawy; Mohamed Abd El-Wahed

Low Cycle Fatigue and Crack Initiation Prediction at the Root of a Notch

Pages 67-78

10.21608/amme.1986.51856

M. GABRA; G. RABIE; M. F.E. IBRAHIM

A STUDY OF ENGINE WEAR AS INFLUENCED BY LUBRICANT CONDITIONS

Pages 79-91

10.21608/amme.1986.51865

M. O.A. MOKHTAR; M. A.E. RADWAN; Z. S. SAFAR; M. S. KHADER

PHOTOELASTIC ANALYSIS OF DRY LINE CONTACT PROBLEM UNDER COMBINED LOADING

Pages 93-102

10.21608/amme.1986.51871

SH. EL KORDY; A. EL SANABARY; N. GADALLAH

APPLICATION OF HERTZ ANALYSIS TO THE CONTACT OF SURFACES COVERED BY SOFT METAL FILMS

Pages 103-110

10.21608/amme.1986.51877

T. E.S. El-Shafei

PRODUCTION OF FERRITIC AND PEARLITIC GRADES OF SPHEROIDAL GRAPHITE CAST IRON BY THE INMOULD PROCESS

Pages 1-14

10.21608/amme.1986.51880

B. A. ELSARNAGAWY; M. TOLBA SALLAM

PROPOSITION OF DEVELOPMENT OF A WELDED STRUCTURES MANUAL TO HELP IN PROMOTING OF THE ARAB WELDING INDUSTRY

Pages 15-25

10.21608/amme.1986.51888

MOUSTAFA MOHAMED MOUSTAFA EL-GAMMAL

EFFECT OF ALLOYING ELEMENTS ON PRODUCTION OF DUPLEX PREFORMS WITH COMPOSITE PROPERTIES

Pages 27-40

10.21608/amme.1986.52030

M. TOLBA SALLAM

THERMAL PROPERTIES OF CO2 SILICATE MOLDS/CORES

Pages 41-50

10.21608/amme.1986.52035

S. K. Mishra; V. K. Jain

THE WEAR CHARACTERISTICS OF SOME ALUMINIUM-SILICON EUTECTIC-BASE ALLOYS.

Pages 51-59

10.21608/amme.1986.52036

M. S. SAmI; S. IBRAHIM

LIQUID PHASE SINTERING USING SUPER ALLOYS

Pages 61-69

10.21608/amme.1986.52041

M. M. Hamoud; M. H. Abd-Elatif; G. A. Said; M. I. Negm

APPLICATION OF CRACKABILITY PARAMETERS TO EVALUATE TEST RESULTS OF SELF-RESTRAINED CRACKING SPECIMENS

Pages 71-82

10.21608/amme.1986.52045

M. R. EL-HEBEARY

WEAR PROPERTIES OF AUSTEHPERED ALLOYED DUCTILE CAST IRON GEARS

Pages 83-97

10.21608/amme.1986.52051

B. Elsarnagawy; M. A. Gaafar; H. A. Madi; E. A. Makssoud

SCALING CRITERIA OF SOLIDIFICATION AND CASTING PROCESSES

Pages 99-109

10.21608/amme.1986.52053

SALAMA A. MOHAMMED

THE INFLUENCE OF STAINLESS STEEL SURFACE ROUGHNESS UPON THE FRICTION AND WEAR OF POLYETHYLENE UNDER DRY AND LUBRICATED CONDITIONS

Pages 1-10

10.21608/amme.1986.52056

M. ZAKI

BENEFICIAL EFFECT OF SHAPING WITH TUBULAR CATHODE IN ELECTROCHEMICAL MACHINING PROCESSES

Pages 11-25

10.21608/amme.1986.52063

A. M. ABDEL MAHBOUD

THE PREDICTION AND CONTROL OF ECM SURFACES

Pages 27-34

10.21608/amme.1986.52076

S. J. EBEID; A. M. ABDEL-MAHBOUD

AN ANALYSIS FOR OPTIMAL CHASING CAM DESIGN

Pages 35-42

10.21608/amme.1986.52159

S. A. ZOROMBA

THE PREDICTION OF THE CUTTING EFFICIENCY FOR TURNING OPERATIONS

Pages 43-50

10.21608/amme.1986.52162

M. S.M. Riad; A. M.A. Moussa; G. H.S. Badawy

A SEMI-ANALYTICAL METHOD FOR DETERMINING THE SUBSURFACE DAMAGE IN MACHINING

Pages 51-59

10.21608/amme.1986.52553

M. M. Elkhabeery

SOME ASPECTES ABOUT ED WIRE CUTTING PRODUCT QUALITY

Pages 61-70

10.21608/amme.1986.52554

S. M. Saleh; M. Elkhabeer; M. Nasser

COMPUTERIZED MACHINABILITY DATA BASE SYSTEMS AS APPLIED TO ECM AND EDM PROCESSES

Pages 1-10

10.21608/amme.1986.52555

S. J. EBEID

EXPERIMENTAL INVESTIGATION OF FLOW EQUATION OF SCMC AQUEOUS SOLUTION IN PIPELINES

Pages 11-19

10.21608/amme.1986.52556

M. T. HARIDI; M. M. HAMZA; Ibrahim SALEH

AUTOMATIC ASSEMBLY - AN ECONOMICAL ANALYSIS

Pages 21-30

10.21608/amme.1986.52557

M. A. HELALY

THE APPLICATION OF PARETO DISTRIBUTION PRINCIPLE TO QUALITY CONTROL IN REPAIR WORKSHOPS

Pages 31-39

10.21608/amme.1986.52558

Adel El Shabrawy

EXPERIMENTAL AND THEORETICAL STUDY ON THE FLAME STABILIZATION BY RECIRCULATION BEHIND A BLUFF-BODY.

Pages 41-51

10.21608/amme.1986.52559

S. H. El-Emam

THEORETICAL REDUCTION OF RATE OF DEPOSITION OF SUSPENSIONS IN TURBULENT FLOW OVER A TILTED FLAT PLATE BY APPLYING AN EXTERNAL ELECTRIC FIELD

Pages 1-13

10.21608/amme.1986.52560

S. M. ELDIGHIDY; K. A. ALBIDWEIHY

A RIGIDITY THEOREM FOR SURFACES IN RIEMANNIAN 3-SPACES.

Pages 15-23

10.21608/amme.1986.52561

RAMY M.K. TALAAT

ELECTRO-HYDRODYNAMIC ANALOGY SOLUTION OF CONFORMAL MAPPING OF EXTERNAL DOMAIN OF AN AIRPLANE FUSELAGE

Pages 25-33

10.21608/amme.1986.52562

O. E . ABDELHAMID

A NEW MEASURE FOR THE STABILITY OF HYPERSURFACES IN THE N- DIMENSIONAL EUCLIDEAN SPACE

Pages 35-44

10.21608/amme.1986.52565

Mohamed Afwat Abd El - Megid

ESTIMATION OF DYNAMIC COEFFICIENTS OF ELLIPTIC HEARINGS WITH VARIED ASPECT AND ELLIPTICITY RATIOS

Pages 45-54

10.21608/amme.1986.52566

A. A-F. MOUSTAFA

NUMERICAL COMPUTATIONS OF TURBULENT AND SWIRLING FLOWS IN AXI-SYMMETRICAL COMBUSTOR

Pages 55-65

10.21608/amme.1986.52567

Tharwat M. FARAG

DESIGN OF REDUCED ORDER OBSERVERS FOR GENERALIZED STATE SPACE SYSTEMS CONTAINING UNKNOWN INPUTS

Pages 67-78

10.21608/amme.1986.52570

Mohammed Abd El -Rahiem El-Imam El-Tohami

ON THE STOKESIAN MOTION OF VISCOUS LIQUIDS DUE TO AN OFF-CENTRE SOURCE

Pages 79-90

10.21608/amme.1986.52571

HELMY MUHAMMAD SAFWAT

COMPUTER AIDED SHIP DESIGN ECONOMICS

Pages 1-20

10.21608/amme.1986.52572

G. YOUNIS

PERSONAL COMPUTERS IN TEACHING DYNAMICS AND MECHANISM ANIMATION

Pages 21-30

10.21608/amme.1986.52573

ALI ABOU EZZ.

THE INTEGRATION OF INDUSTRIAL ROBOTS INTO CIM SYSTEMS

Pages 31-39

10.21608/amme.1986.52574

M. F. ABDIN

COMPUTERISED CALCULATIONS OF AUTOMOBILE CLUTCH ASSEMBLY

Pages 41-55

10.21608/amme.1986.52575

SAID ALI HASSAN

The International Conference on Applied Mechanics and Mechanical Engineering

Journal Archive

Volume 19 (2020)

Volume 18 (2018)

Volume 16 (2014)

Volume 15 (2012)

Volume 14 (2010)

Volume 13 (2008)

Volume 12 (2006)

Volume 2 (1984)

Volume 1 (1984)

2nd Conference on Applied Mechanical Engineering.

1st Conference on Applied Mechanical Engineering.