A
-
A., ELBAZ S.
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
A., SHAHIN M.
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Abbass, Mohamed
Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Abdel-aziem, Nasser
Frequency Response of 10 Degrees of Freedom Model For Vehicle Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Abdel-Fattah, M.
BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
Abdelhady, Salama
A Three Dimensional-System of Units [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Abdel-Karim, M.
Effect of elastic modulus variation during plastic deformation on simulations of uniaxial ratchetting [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Abd El-Wahab, H. S.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Abdel-Wahed, M. A.
BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Abdir, M. S.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Abdul Aziz, Faieza
Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Abo El-Dahab, M. M,
Finite Element Analysis of Fatigue Damage of Composite Laminated Structures under Stochastic Loading [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Abo_Elkhair, M. S.
Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Abo_Elkhair, M. S.
Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Abo_Elkhair, M. S.
Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Abo- El khier, M.
Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Abo-Elnor, M. E.
Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Abo-Elnor, M. E.
Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Abo-Elnor, M. E.
Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Abou-Elela, H. A.
NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
-
Abu-Alshaikh, I.
Vibration of Fractionally Damped Beams Subjected to a Moving Harmonic Load [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Abuelezz, A.
The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Abu-Mallouh, R.
Vibration of Fractionally Damped Beams Subjected to a Moving Harmonic Load [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Afefy, I. H.
Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
Afifi, Amal
Local buckling of axially compressed fully and partially stiffened GRP short columns: A comparison of Experimental and FE Analysis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Ahmed, Saad
Dump combustor swirling flow reconstruction using neural network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Ajala, M. R.
MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Alanbari, M. H.
ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Albatlan, S. Abu alyazeed
Experimental analysis and performance characteristics of air brake load sensing relay valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Allam, Elsayed E.
Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Allam, Essam M. M.
Evaluation of wind noise emitted from vehicle windows [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Almazy, K.
Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Almazy, Kh.
Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Alraiess, F. M.
FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Aly, A. Abou El-Azm
Effect of upstream throttle valve on static and dynamic characteristics of counterbalance valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-17]
-
Amici, Cinzia
Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Angulo, Jaime
ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Asfoor, M. Sh.
Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Atef, M.
Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
Atwa, A. A.
Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Avello, Agustín Jiménez
ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Awaad, M.
Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Awaad, M.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Awaad, M.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
AYDIN, Kadir
Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
B
-
Badia., Ahmed H. A.
Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Bahei El- Deen, A.
Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Baioumy, Sohier Mohamed Hussien
Product Cost Estimation Using Fuzzy Logic [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Bakari, Mohamed J.
Sensing Strategy for Multi-Arm Mobile Robot Navigation For Nuclear Decommissioning Tasks [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Barsoum, Fady F.
Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Bishay, Peter L.
Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Bosila, Amr
Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Breda, Claudio
Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
C
-
Choi, Se-Young
The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Choi, Se-Young
A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Ciric-Kostic, Snezana
Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
D
-
Daidzic, Nihad E.
The Model of Micro-Fluidic Pump with Vibrating Boundaries [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
DINESH, R.
BIODIESEL FROM SEABUCKTHORN OIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Dovgy, Stanislav O.
Performance Optimization of a Vertical Axis Wind Turbine With Mechanism of Blade Pitch Control [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
E
-
El-Abbasy, Raoof
Metallurgy of Cement-less T.H.R [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
El-Demerdash, S. M.
Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
El-Dib, A. F.
Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
Elhaddad, M.
Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
Eliewa, A.
Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
El Kadi, Hany
Dump combustor swirling flow reconstruction using neural network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
El-Kherbawi, M. A.
Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Elmaihy, Aly
Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
ElMaihy, A. A.
Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
ElMaihy, A. A.
Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Elnady, T.
Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
El-Nady, A. M.
Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Elsayed, Kh.
Modeling of the Gas and Particle Flow in the Cyclone Separator using LES, RANS and Mathematical Models [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
El- Sayed, Reda
Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Elseddig, Zuhair Agab
Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
El-Shaer, Y. I.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Elshafei, M. Adnan
FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Elshafei, M. Adnan
MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Elshamarka, S. E.
Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Elshamarka, S. E.
Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Elshamarka, Salman E.
Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Elsharkawy, Yasser H.
Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
El-Sherbiny, M.
The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Elsherif, I. A.
Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Elthalabawy, Waled Mohamed
Solid-state diffusion enhancement of liquid phase joints between austenitic stainless steel alloy and magnesium alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
El-Zomor, H. M.
Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Emam, M. A.
Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
F
-
F., Mandour, M.
Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
Fam, Amir
Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Fayed, A. I.
NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
-
Fayed, A. I.
BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
Fayed, A. I.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Filippone, José Guillermo
ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Forouzan, M. R.
Dynamic Analysis of A Modified Truck Chassis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Fragassa, Cristiano
Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
G
-
Gadallh, Mohamed H.
Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Gadelrab, R. M.
Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Ghali, Saeed. N.
Low carbon high nitrogen stainless steel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Gharib, Mohamed
Multiple Impacts in Rigid Bodies [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Ghobakhloo, Morteza
Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Ghoniemy, Samy A.
Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Girgis, N.
ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Gomaa, A. H.
Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
Greil, P.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
H
-
Haggag, Essam
Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Hamada, A. A.
Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Hammad, H. A.
Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Hassan, Galal
Frequency Response of 10 Degrees of Freedom Model For Vehicle Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Hassan, I.
Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Hegaze, Moutaz M.
Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Hegaze, Moutaz M.
Finite Element Analysis of Fatigue Damage of Composite Laminated Structures under Stochastic Loading [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Hegazy, R.
The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Hegazy, S.
ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Hoseini, R.
Dynamic Analysis of A Modified Truck Chassis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Hossain, MD Shakhawath
The Model of Micro-Fluidic Pump with Vibrating Boundaries [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Hurmuzlu, Yildirim
Multiple Impacts in Rigid Bodies [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Hussein, R.
Reinforced Concrete Beam Sections Under Biaxial and Axial Force: An Exact Solution [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Hussein, R.
Closed-Form Solution For Laminated Bio-composite Plates With Interlayer Slip [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Hussein, W. M.
Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Hussien, Hesham A.
Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
I
-
Ibrahim, A. G. M.
Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Ibrahim, A. G. M.
Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Ibrahim, Ayman G. M.
Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Ibrahim, Hesham
Approximate Models for Crashworthiness Design Optimization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Ibrahim, M.
The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Ibrahim, M. A.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Ibrahim, Mohamed A.
Utilizing Stabilized ZrO2 In Armor Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Ibrahim, S. S.
Advanced Numerical and Experimental Studies of Premixed Flame Propagation Past Solid Obstructions [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
K
-
K, Mahmoud, O.
Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
Kadem, L.
Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Kadkhodayan, M.
Simulation and analysis of hot forging process for industrial locking gear elevators [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Karagiozova, D.
Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Kenawy, S. H.
Synthesis Aluminum Borate Ceramic [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Kenawy, S. H.
Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Kenawy, S. H.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Khadour, N. S.
Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Khadour, N. S.
Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
-
Khan, Tahir Irfan
Solid-state diffusion enhancement of liquid phase joints between austenitic stainless steel alloy and magnesium alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Khodary, R.
Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
-
Kim, Hee-Jae
The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Kossa, S. S.
FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Kostic, Snezana Ciric
Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
L
-
Lacor, C.
Modeling of the Gas and Particle Flow in the Cyclone Separator using LES, RANS and Mathematical Models [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Lancini, Matteo
Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Lebid, Oleksy G.
Performance Optimization of a Vertical Axis Wind Turbine With Mechanism of Blade Pitch Control [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Lim, Jaemin
The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Lim, Jaemin
A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Lucas, T.
Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
M
-
M, Abdalla, H.
Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
-
M., MAHGOUB H.
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Maalawi, Karam Y.
Frequency optimization of functionally graded bars in axial motion [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Maarefdoust, M.
Simulation and analysis of hot forging process for industrial locking gear elevators [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Mabrouk, Mohamed H.
Path Planning of High Speed Manipulators according to Actuator Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
MABROUK, M. H.
MULTI-AGENT SYSTEM PATH-PLANNING USING AGENT PERCEPTUAL MODEL AND DYNAMIC ARTIFICIAL POTENTIAL FIELDS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Maher, M.
Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Mahgoub, Hussien M.
Path Planning of High Speed Manipulators according to Actuator Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Mansour, Mohy S.
Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Medhat, A.
Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Mekawy, Gehan
Technology of Short Stem T.H.R [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Memon, Ashfaque Ahmed
DIRECT METHOD FOR THE ESTIMATION OF GRAIN SIZE MEASUREMENT [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Metwally, M.
Effect of upstream throttle valve on static and dynamic characteristics of counterbalance valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-17]
-
Morgan, E. I. Imam
Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Murrenhoff, H.
Research on Series Hydraulic Hybrid Drivetrain for Using in Automobile [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
N
-
Naga, S. M.
Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Naga, S. M.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Naga, S. M.
Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Naga, Salma
Preparation and Characterization of Mullite Fiber Reinforced Alumina Matrix. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Negm, Hani M.
Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
O
-
Ognjanovic, Milosav
Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Ooi, KT
Inception of the Revolving Vane Compressor [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
P
-
Palanivasan, R.
Optimizing Influence of Process Parameters on Induction Hardening for IC Engine Valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Pavlovic, Ana
Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Pavlovic, Ana
Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Putrasari, Yanuandri
Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
R
-
Rabeeh, Bakr Mohamed
Engineering Of Hybrid Composite/ Intermetallic Al-Fe-Si Fibers For Structural Materials Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Rabeeh, Bakr Mohamed
Macroscopic and Microscopic Aspects Observed in Composite Processing For Shape Memory Alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Rabeih, E.
Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Radi, A. E.
Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Radi, A. E.
Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
-
Radi, A. E.
Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Radi, Ahmed Emad-Eldin
Tribology of Short Stem Total Hip Replacement (T.H.R) [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Ragheb, H.
ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Ragheb, M.
Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Rashad, Ahmed Mohamed
Experimental Study on a Diesel Engine Fuelled with New and Used Cooking Oil Methyl Ester [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Rasmy, Mohamed H.
Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Riad, A. M.
MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
-
Riad, A. M.
BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Riad, A. M.
NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
-
Riad, A. M.
BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
S
-
Sabra, M.
Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Saleh, Ibrahem
Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Saleh, Mahmoud A.
Technology of Production and Testing of Composite Armour Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Saleh, W.
Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Salem, A. M.
BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Salem, A. M.
Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Salem, A. M.
Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Salem, A. M.
Modeling and Simulation of Tracked Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Sallam, M. T.
Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Sallam, M.
Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
-
Sebayang, Darwin
Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Sedaghati, Ramin
Approximate Models for Crashworthiness Design Optimization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Serry, Mohamed A.
Refractory Ceramics and their Industrial Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
-
Shaaban, S. M.
Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Shahien, Moatasem
Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
-
Sharaf, A. M.
Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Shehata, M. S.
Cylinder Pressure, Performance Parameters, Heat Release, Specific Heats Ratio and Duration of Combustion for Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-26]
-
SHEHATA, M. S.
COTTON, PALM AND FLAX OILS AS ALTERNATIVE FUELS FOR DIESEL ENGINE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-25]
-
Shim, Gyu-In
The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Shim, Gyu-In
A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Shoukrey, Mohamed K.
Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Sobih, M.
Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Soh, A. K.
Phase field simulation of ferroelectrics with defect [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Sokar, Ibrahim-
Research on Series Hydraulic Hybrid Drivetrain for Using in Automobile [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Soliman, Omar S.
Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Soskic, Zlatan
Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
T
-
Tawfik, Mohammad
Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Turvey, Geoffery
Local buckling of axially compressed fully and partially stiffened GRP short columns: A comparison of Experimental and FE Analysis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
U
-
ULUDAMAR, Erinç
Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Untoro, Pudji
Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
V
-
VARUN SHANKAR, S. S.
BIODIESEL FROM SEABUCKTHORN OIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
VESELINOVA-GUTEVA, Varvara
COEFFICIENT OF SENSITIVENESS TO A REGISTERED CROSS-SYMMETRIC CRACK AT STABILITY OF A SLENDER PRISMATIC COLUMN [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
W
-
Warkhedkar, Ravi. M.
Optimizing Influence of Process Parameters on Induction Hardening for IC Engine Valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Y
-
YILMAZ, Ali Can
Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Younes, M. M.
NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Youssef, Amro M.
Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Youssef, Amro M.
Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
-
Yu, T. X.
Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Z
-
Zhang, X. W.
Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
-
Zhang, Yi
Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Zhao, X. F.
Phase field simulation of ferroelectrics with defect [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
-
Zidan, A. S.
BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
-
Zidan, A. M.
Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
-
Zidan, A.
Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
-
Zied, Khaled M.
Sensing Strategy for Multi-Arm Mobile Robot Navigation For Nuclear Decommissioning Tasks [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
-
Zulkifli, Norzima Binti
Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Your query does not match with any item