A
-
A., Ali A.
THE MECHANICAL BEHAVIOUR OF RECYCLED HIGH DENSITY POLYETHYLENE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 35-50]
-
A., Al-Maqtri M.
Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
-
A., Assar
A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
-
A., El-Butch
SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
-
A., El-Haddad M.
SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]
-
A., Elhakim M.
OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
-
A., Elhemly M.
IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]
-
A., El Tantawie, M.
ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
-
A., Fayed M.
IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]
-
A., Hegazy S.
Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
-
A., ISKANDER B.
THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
-
A., Mahmoud N.
EFFECT OF PIPE INCLINATION AND ADDING FINES ON SLURRY TRANSPORT OF COARSE PARTICLES. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 298-314]
-
A., Omer A.
DESIGN AND MANUFACTURING OF NEW UNWEIGHING SYSTEM. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 421-431]
-
A., Risha H.
A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
-
A., Shahin M.
RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
-
A., Shahin M.
SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
-
A., Shahin M.
DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
-
A., Sherif H.
CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
-
A., Showaib E.
EXPLORATORY STUDY OF THE BEHAVIOR OF SOME LOCAL AGRICULTURAL RESIDUAL MATERIALS TO BE USED FOR REINFORCING CONSTRUCTION MATERIALS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 92-111]
-
A., Wahba W.
OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
-
Abdelkader, M. S.
BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]
-
Abdel-Moneim, S. A.
HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
-
ABDOU, S. E.
INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
-
Afify, R. I.
HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
-
AWAD, MOHAMMED A.
DETERMINATION OF MACHINING PROCESS FOR ROTATIONAL PARTS USING NEURAL NETWORKS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 239-251]
B
-
B., Ahmad. S.
NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
-
B., AMGAD M.
AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
-
B., Badawi A.
RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
-
B., Badawi A.
SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
-
B., Badawi A.
DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
-
B., BHAT R.
CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]
E
-
E., ABDELHADY M.
AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
-
E., DEPING LI M.
CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]
-
E., El-Soaly E.
WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
-
E., EL Soaly, E.
ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
-
E., GAMAL M.
AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
-
E., Mokhtar M.
METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
-
E., Rabieh
SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
-
E., Tarek. H.
NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
-
El Adl, S. M., Rabeih
EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
-
Elawad, E.
BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]
-
Elmaihy, A.
RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
-
Elmaihy, A.
SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
-
Elmaihy, A.
DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
-
EL-SENBAWI, M. Allam
DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
-
El-shamy, A. R.
HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
F
-
F., HASSAN M.
STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
-
F., YOSSEF A.M.
THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
-
F., Younes M.
AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
-
Fayed, A.
BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]
G
-
G., Raafat. M.
NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
-
Girgis, N.
DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
H
-
H., BAKER M.
THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
-
H., Daken M.
WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
-
H., Ebraheem M.
SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]
-
H., El-Dannanh E.
AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
-
H., Hossamel-deen Y.
Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
-
H., LOTFY A.
THEORETICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC BEHAVIOR OF AN ELECTRO-HYDRAULIC DIRECTIONAL PROPORTIONAL VALVE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 165-177]
I
-
I., EL SEAIDY M.
FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
-
I., Elshaer Y.
DESIGN AND MANUFACTURING OF NEW UNWEIGHING SYSTEM. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 421-431]
-
I., Mohamed K.
RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
-
I., Mohamed K.
SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
-
I., Mohamed K.
DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
-
Ibrahim, E. A.
DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]
-
Ismail, M. M.
DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]
K
-
K., Ahmed A.
METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
-
K., KHALIL M.
CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]
-
K., Younes Y.
EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
-
K., Younes Y.
AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
M
-
M., Abd Elkhalek Sh.
OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
-
M., Bayoumy A.
INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
-
M., Bennaya
CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
-
M., El Demerdash S.
EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
-
M., Elhady A.
ACTIVE CONTROL EFFECT ON REDUCING NOISE AND RESONCE AMPLITUDE OF CLAMPED PLATE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 718-724]
-
M., Elhady A.
DYNAMIC IMPACT PROBLEMS: MODELING AND ANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 679-696]
-
M., El kafafy
SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
-
M., El-Maddah
AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
-
M., ELNAGGAR W.
STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
-
M., Elshabka A.
INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
-
M., El-Wahab M.
WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
-
M., GHONEIM M.
FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
-
M., Ibrahim I.
INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
-
M., Ibrahim
AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
-
M., IBRAHIM M.
FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
-
M., IBRAHIM
THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
-
M., KHOAIL A.
THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
-
M., KOHAIL A.
STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
-
M., KUFFOVA
FATIGUE RESISTANCE OF MAGNESIUM ALLOY AZ 91D AT HIGH-FREQUENCY CYCLE LOADING. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 15-21]
-
M., Mahgoub H.
CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
-
M., MASOUD M.
STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
-
M., MENSHAWY T.
THEORETICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC BEHAVIOR OF AN ELECTRO-HYDRAULIC DIRECTIONAL PROPORTIONAL VALVE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 165-177]
-
M., Metwally M.
METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
-
M., Mohamed A.
METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
-
M., MOHIE
THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
-
M., MOUGHITH W.
THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
-
M., OSMAN M.
STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
-
M., RASHAD M.
STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
-
M., Salem A.
Evaluation of tracked vehicle performance characteristics [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 397-409]
-
M., Sharkawi A.
EXPLORATORY STUDY OF THE BEHAVIOR OF SOME LOCAL AGRICULTURAL RESIDUAL MATERIALS TO BE USED FOR REINFORCING CONSTRUCTION MATERIALS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 92-111]
-
M., Tawfic T.
AN INVESTIGATION OF THE INSERTIONMECHANISM INFLUENCE ON THE OVERALL BEHAVIOR OF THE THREE-DIMENSIONAL AEROSPACE COMPONENTS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 1-8]
-
MAALAWI, KARAM Y.
TORSIONAL DYNAMIC OPTIMIZATION OF WIND POWER GENERATORS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 625-642]
-
MAHMOUD, Tamer N.
DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
-
Metwally, M.
DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
O
-
O., Mohamed T.
INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
R
-
R., Ghazy M.
ACTIVE CONTROL EFFECT ON REDUCING NOISE AND RESONCE AMPLITUDE OF CLAMPED PLATE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 718-724]
-
R., Gomaa F.
Fault monitoring in complex dynamic system by utilization statistical analysis technique [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 643-658]
-
R., Ramadan M.
A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
-
Rabie, G.
DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
-
RABIE, M. Galal
INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
-
RABIE, M. Galal
DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
-
Refaey, H. A.
HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
-
Riad, A. M.
DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]
S
-
S., Abo El-Khair M.
THE MECHANICAL BEHAVIOUR OF RECYCLED HIGH DENSITY POLYETHYLENE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 35-50]
-
S., Ahmad. M.
NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
-
S., EL-AGAMY M.
DETERMINATION OF MACHINING PROCESS FOR ROTATIONAL PARTS USING NEURAL NETWORKS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 239-251]
-
S., El-Demerdash
SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
-
S., El-Kader M.
WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
-
S., Fangary Y.
EFFECT OF PIPE INCLINATION AND ADDING FINES ON SLURRY TRANSPORT OF COARSE PARTICLES. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 298-314]
-
S., Hani S.
EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
-
S., Hassan, S.
ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
-
S., Mohamed M.A.
DESIGN ALTERNATIVES FOR A MULTI-STANDARD MACHINE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 410-420]
-
S., Mohamed M.A.
A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
-
S., MOHAMED M.A.
A CRACK PATH-BASED MODEL TO ASSESS MICROSTRUCTURE INCLUSIONS RANDOMNESS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 1-14]
-
S., MOHAMED M.A.
MECHANICAL CRITERIA FOR REPORTS TO OPTIMALLY JUMP AND RUN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 144-164]
-
S., Moughith W.
OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
-
S., MOUGHITH W.
STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
-
S., Samy A.
RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
-
S., Samy A.
SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
-
S., Samy A.
DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
-
Saleh, I.
DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
-
SALEH, Tamer A.
INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
-
Sh., Asfoor M.
SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]
W
-
W., Galal
Evaluation of tracked vehicle performance characteristics [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 397-409]
Y
-
Y., Zeyada
IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]
Your query does not match with any item